INTAC Microprocessor      ES Features      ESDDR Features      Optional Features      Literature

For Humidification Call CTM Today: Patrick Sweeney at 1 (905) 624-4823 ext. 116

ES Series Electric Humidifier

The “ES” Series Electric Humidifier from PURE Humidifier Company is loaded with features and options. All you need is water, electricity, and a sanitary drain—the humidifier does the rest.

Available Models

The “ES” model works with standard water and uses a Tri-Probe assembly to maintain the water level. The “ESDDR” model is for use with Deionized, Demineralized or Reverse Osmosis water. It utilizes a stainless steel float-operated fill valve to maintain the water level and a stainless steel float-operated low water cut-off switch.

Ease of Maintenance

The unique side-entry heater assembly provides a large clean out access section without disturbing the cover or injection tube system’s steam supply piping.

Capacities 

Capacity range up to 306 lbs/hr with single units. Multiple humidifiers in a Master/Drone configuration allow for an unlimited system design.

 

INTAC® Microprocessor

The INTAC® microprocessor comes factory-mounted on the control panel door and provides industry-leading features. It comes loaded with features such as a vacuum fluorescent display, WATTCycle heater control, time-to-clean messages, on-screen “HELP” menus, full networking and BAS communications ports.

Control

Available with basic On/Off control (+/- 5%), Time Cycle Modulation for close tolerance applications (+/- 3-4% RH), or SCR modulation for superior controllability (+/- 1-2% RH).

 Dispersion Methods

Choose from straight injection tubes, Fast-Pac multiple injection tube assembly, or the Insty-Pac for short dissipation applications. Area humidification can be achieved using a remote-mounted Blower Pack assembly.

Standard ES Features

  • 304 stainless steel construction
  • Tri-Probe level controller
  • Adjustable surface water flusher
  • Motorized drain valve with brass body
  • User-adjustable automatic drain system
  • Seasonal End of Use drain system
  • Manual reset over-temperature switch
  • 80 watt per square inch incoloy immersion heaters 
  • INTAC® Microprocessor

Standard ESDDR Features

  • 304 stainless steel construction
  • Stainless steel float-operated fill valve
  • Stainless steel overflow stand pipe
  • Stainless steel manual ball valve drain
  • Manual reset over-temperature switch
  • 80 watt per square inch incoloy immersion heaters 
  • INTAC® Microprocessor

Optional Features

  • Factory-mounted control panel
  • NEMA 4 weather-tight control panel
  • Control panel door lock
  • Door interlock safety switch
  • Support legs
  • Wall brackets
  • Factory-insulated reservoir
  • Freeze protection
  • Stand-by water temperature sensing
  • Blower Pack for area humidification
  • Variable Air Volume control
  • Outdoor air temperature sensing
  • Drain tempering kit
  • Remote INTAC® microprocessor controller
  • Outdoor Enclosure
 

Back to Top 



 

Literature
ES Product Brochure  
ES Product Brochure
ES CAD Drawing  
ES CAD Drawing
ES Specifications  
ES Specifications
ESDDR Product Brochure  
ESDDR Product Brochure
ESDDR Specifications  
ESDDR Specifications
ESDDR Options  
ESDDR Options
INTAC Spec for ES  
INTAC® Spec for ES

Back to Top