INTAC Microprocessor      GX Features      GXDDR Features      Optional Features      Literature

For Humidification Call CTM Today: Patrick Sweeney at 1 (905) 624-4823 ext. 116

Gas Fired Humidifier - GX

Looking for an alternative to electrically generated steam humidification? Concerned about using chemically treated boiler steam for direct humidification? If so, PURE’s “GX” Series (patent no. 6,705,535) Gas Fired Humidifiers are exactly what you’re looking for.

Available Models

The “GX” model works with standard water and uses a Tri-Probe assembly to maintain the water level. The “GXDDR” model is for use with Deionized, Demineralized or Reverse Osmosis water. It utilizes a stainless steel float-operated fill valve to maintain the water level and a stainless steel float-operated low water cut-off switch. Humidifiers can be used with either natural or propane gas.

Ease of Maintenance

The unique side entry heater assembly provides a large clean out access section without disturbing the cover or injection tube system’s steam supply piping.

Capacities

Capacity range up to 900 lbs/hr with single units. Multiple humidifiers in a Master/Drone configuration allow for an unlimited system design.

Efficient

PURE’s highly efficient heat exchanger produces combustion efficiencies up to 84%, as well as providing simplified maintenance.

Energy Savings

Operating costs are much lower for gas than for electric almost everywhere you look in the United States.

Gas Burner 

Power burner technology allows for horizontal or vertical venting to accommodate virtually any installation location.

 

INTAC® Microprocessor

The INTAC® microprocessor comes factory-mounted on the control panel door and provides industry leading features. Loaded with features such as a vacuum fluorescent display, time-to-clean messages, on-screen “HELP” menus, full networking and BAS communications ports.

ETL Listed

ETL certified to IAS(AGA/CGA) standard 12-94 for gas-fired humidifiers

Dispersion Methods 

Choose from straight injection tubes, Fast-Pac multiple injection tube assembly, or the Insty-Pac for short dissipation applications. Area humidification can be achieved using a remote-mounted Blower Pack assembly.

Standard GX Features

  • 304 stainless steel construction
  • Factory-mounted control panel
  • Support legs
  • Factory-insulated reservoir
  • Tri-Probe level controller
  • Adjustable surface water flusher
  • Motorized drain valve with brass body
  • User adjustable automatic drain system
  • Seasonal End of Use drain system
  • Dual manual reset over-temperature switch (water reservoir and gas exhaust)
  • INTAC® Microprocessor 
  • Drain tempering kit

Standard GXDDR Features

  • 304 stainless steel construction
  • Factory-mounted control panel
  • Support legs
  • Factory-insulated reservoir
  • Stainless steel float-operated fill valve
  • Stainless steel overflow stand pipe
  • Stainless steel manual ball valve drain
  • Dual manual reset over-temperature switch (water reservoir and gas exhaust)
  • INTAC® Microprocessor 
  • Drain tempering kit

Optional Features

  • NEMA 4 weather-tight control panel
  • Control panel door lock
  • Door interlock safety switch
  • Freeze protection
  • Stand-by water temperature sensing
  • Blower Pack for area humidification
  • Variable Air Volume control
  • Outdoor air temperature sensing
  • Remote INTAC® microprocessor controller
  • Outdoor enclosure
 

Back to Top 



 

Literature
Gas Fired Humidifier Brochure  
Gas Fired GX Humidifier Brochure
GX CAD Drawing  
Gas Fired GX CAD Drawing
GX Specifications  
GX Specifications
GXDDR Specifications  
GXDDR Specifications
GX GXDDR Options  
GX GXDDR Options

Back to Top